Direct call +49 171 2322212‬

CONSTRUCTION – DRILLING AND MINING – EQUIPMENT

 

 

 

 

 

 

 

Direct call
+49 171 2322212‬

CONSTRUCTION – DRILLING AND MINING – EQUIPMENT

 

 

 

 

 

 

 

New Inventory

 

Tophammer - Blasthole Drilling Rig

Atlas Copco / Epiroc SmartROC T40-11

year 2013

Hours (total): approx. 14500

Hours (drifter):

 

Hole diameter: 76 – 127 mm (3– 5”)

Drill steel:  45 and 51 mm (T45/T51)

 

Currently equipped for drill steel T51

 

CAT-Engine C7.1 ACERT (168 KW/225 HP) / 2200 rpm/min (Tier4/Stufe IIIB)

Rock Drill Output Power:

COP 2560 EX: 23kW (30.8 HP)

Hydraulic rock drill COP 2560 EX

ROPS/FOPS-cabin with air conditioner

Adjustable boom system B12

Hydraulic cylinder feed system BMH 6000 with double hose guide

Rod changer RHS 51 with magazine (6+1)

Moveable drill steel support

Atlas Copco screw type compressor XAS186Dd max. 10.5 bar (152 psi)

Crawler type two speed undercarriage with track oscillation system

One-bar grouser plates

Hydraulic cooling system for 50° C ambient temperature

Combined warning sound and warning light

Rock drill lubrication system

Dust collecter DCT 110 with moveable suction head

Water injection with tank

Rock Drill control system COP Logic

Central lubrication system

Rear view camera

Parking heater

Radio

 

Transport dimensions (approx.):

Length: 12.80 m

Width:  2.50 m

Height: 3.20 m

Weight: 16000 kg

 

_________________________________

Tophammer – Blasthole Drilling Rig

Atlas Copco / Epiroc  SmartROC T40-11

Bj. 2013

Betr.-Std. (gesamt): ca. 14.500

Betr.-Std. (Hammer):

Bohrlochdurchmesser: 76 – 127 mm (3-5“)

Bohrstahl:  45 oder 51 mm (T45 / T51)

 

aktuell ausgerüstet für Bohrstahl T51

 

CAT-Motor C7.1 ACERT (168 KW/225 PS)/2200 U/min (Tier4/Stufe IIIB)

Hydraulischer Gesteinsbohrhammer: COP 2560 EX

ROPS/FOPS-Kabine mit Klimaanlage

Knickausleger B12

Hydraulikzylinder-Lafette BMH 6000 mit doppelter Schlauchrolle

Stangenwechsler RHS 51 mit Magazin (6+1)

Bewegliche Bohrstangenführung

Atlas Copco Schraubenkompressor XAS186Dd max. 10.5 bar (152 psi)

Hydraulik-Kühlsystem für 50° C Umgebungstemperatur

Kombinierter Warnton und Warnlicht

Raupenfahrwerk mit zwei Geschwindigkeiten und Oszillation

1-Steg-Bodenplatten

Schmiersystem für Gesteinsbohrungen

Staubabsaugung DCT 110 mit beweglicher Staubhaube

Wassereinspritzung mit Tank

Gesteinsbohr-Kontrollsystem COP-Logic

Zentralschmieranlage

Rückfahrkamera

Standheizung

Radio

 

Transportabmessungen (ca.):

 Länge: 12,80 m

Breite: 2,50 m

Höhe: 3,20 m

Gewicht: ca. 16.000 kg

 

Tophammer – Blasthole Drilling Rig

Atlas Copco / Epiroc FlexiROC T45-10SF

Year 2013

Hours (total): approx. 10.970

Hours (drifter): approx. 3.730

 

Hole diameter: 89 – 140 mm (3 ½” – 5.5”)

Drill steel:  51 and 60 mm (T51/T60) (2”, 2 ⅜”)

 

Currently equipped for drill steel “GT60”

CAT-Engine C9.3 ACERT (242 KW/329 HP) / 1900 rpm/min (Tier4/Stufe IIIB)

Hydraulic rock drill COP 3060

ROPS/FOPS-cabin with air conditioner

Fixed boom system

Feed with Hose Reel

Rod changer with magazine

Moveable drill steel support

Hydraulic chain feed system with hose guide

Atlas Copco screw type compressor max. 12 bar / 174 psi

Crawler type two speed undercarriage with track oscillation system

One-bar grouser plates

Hydraulic cooling system for 50° C ambient temperature

Combined warning sound and warning light

Rock drill lubrication system

Dust collecter DCT 200 with moveable suction head

Rock Drill control system COP Logic

 

Transport dimensions (approx.):

Length: 10.70 m

Width:  2.50 m

Height: 3.30 m

Weight: 21000 kg

 

_____________________________

 

Aussenloch – Sprengloch-Bohrgerät

Atlas Copco / Epiroc  FlexiROC T45-10SF

Bj. 2013

Betr.-Std. (gesamt): ca. 10.970

Betr.-Std. (Hammer): ca. 3.730

 

Bohrlochdurchmesser: 89 – 140 mm

Bohrstahl:  51 oder 60 mm (T51 / T60)

aktuell ausgerüstet für Bohrstahl „GT60“

 

CAT-Motor C9.3 ACERT (242 KW/329 PS)/1900 U/min (Tier4/Stufe IIIB)

Hydraulischer Gesteinsbohrhammer: COP3060

ROPS/FOPS-Kabine mit Klimaanlage

Monoausleger

Zylinder-Seil-Lafette mit Schlauchrolle

Stangenwechsler mit Magazin

Bewegliche Bohrstangenführung

Hydraulische Kettenzugführung mit Schlauchführung

Atlas Copco Schraubenkompressor max. 12 bar

Hydraulik-Kühlsystem für 50° C Umgebungstemperatur

Kombinierter Warnton und Warnlicht

Raupenfahrwerk mit zwei Geschwindigkeiten und Oszillation

1-Steg-Bodenplatten

Schmiersystem für Gesteinsbohrungen

Staubabsaugung DCT 200 mit beweglicher Staubhaube

Gesteinsbohr-Kontrollsystem COP-Logic

 

Transportabmessungen (ca.):

Länge: 10,70 m

Breite: 2,50 m

Höhe: 3,30 m

Gewicht: 21.000 kg

 

Dozer

Caterpillar D6N LGP

Year 2014, approx.  12840 hours

CAT Engine C6.6 ACERT – 112 KW/152 HP

ROPS/FOPS-cabin

Air conditioner

Differential steering

Track-shoes 840 mm / 33 inch

VPAT-blade foldable (capacity 3.16 m³ / 4.13 yd³ – width 4080 mm / 13.39 ft)

CAT Ripper (3-shanks/parallelogram)

Fuel filter preheater

Additional headlights LED

Pre-arrangement (cable) for laser control (ready for Trimble/Leica)

Condition of undercarriage:  > 50 %

good generally condition

last service made at 12580 hours (08/23)

CE / EPA

 

Transport dimensions (approx.):
Length: 7.40 m
Width:  3.15 m
Height: 3.20 m
Weight: approx. 18000 kg

 

_____________________________________________

Kettendozer CAT D6N LGP

Bj. 2014, ca. 12.840 Betr.-Std.

CAT Motor C6.6 ACERT  – 112 KW/152 PS

ROPS/FOPS-Kabine

Klimaanlage

Differentiallenkung

Bodenplatten 840 mm

VPAT-Schild faltbar  (3,16 m³ / 4.080 mm Breite)

CAT-Heckaufreisser (3-Zahn/Parallelogramm)

Dieselfiltervorwärmung

Zusatzscheinwerfer LED

Vorrüstung (Kabelbaum) für Lasersteuerung (Trimble/Leica)

Laufwerkszustand: > 50 %

guter Allgemeinzustand

letzter Service bei 12.580 Betr.-Std. (08/23) durchgeführt

CE / EPA

 

Transportabmessungen (ca.):
Länge:  7,40 m
Breite:  3,15 m
Höhe:   3,20 m
Gewicht: ca. 18.000 kg

 

 

Equipment For Hydaulic Excavator

Bucket CAT/Verachtert CW45S / Caterpillar 336 etc.

General Purpose

1.60 m width / capacity approx. 2.1 m³ 

5 teeth (long tip tooth 1U3352 / CAT J350)

 

fits CAT/Verachtert – Quickcoupling System CW45S

for excavator operating weight: 28-38 to  (CAT 336 etc.)

 

as new

 

weight: approx. 1400 kg

 

_________________________________________________________

 

Universal Tieflöffel 1.600 mm Breite / ca. 2,1 m³ Inhalt  

5 Zähne (lange Zahnspitze 1U3352 / CAT J350)

 

passend an CAT/Verachtert-SW CW45S (Bagger Einsatzgewicht: 28-38 t. – z. B. CAT 336)

neuwertig

 

Gewicht: ca. 1.400 kg

 

 

Ripper Parts – Cylinder, Shanks, Tips etc.

Ripper for Caterpillar D6 H/R/T  –  SOLD

Manufacturer: Bedrock Attachments

Multi-Shank Parallelogram style ripper w/1 cylinder

All parts for this high quality aftermarket ripper (shanks, tips, cylinder, seal kits) are interchangeable with OEM parts.

Please ask for the availability!

_________________________________________________________

 

Parts for Caterpillar Ripper

 

Various wearing/spare parts for rippers available such as…

 

Cylinders:

2x D8T Lift-Cylinder (1553653)

1x D8T Tilt-Cylinder (1553652)

1x D8T Tilt-Cylinder (1650102)

 

Shanks:

1x (Straight) Shank – (9J3139)

3x (Curved) Shank – 9J8923 (D6T)

1x Shank – 9J8913 (D5N/D6K)

2x Shank – 1U1257 (D5G/D5K)

1x Shank – 8J5299 (D5C)

1 x Shank – 8E5347 (D8T)

 

Shank Holder:

3x Shank Holder 5K7748

2x Shank Holder 9J1367

1x Shank Holder 5K8330

1x Shank Protector 8E1848

 

Tips:

2x Tip – 6Y0352 (D6T)

2x Tip – 6Y0359 (D7R)

2x Tip – 9J4259 (D5G/D5K)

1x Tip – 1U3201 (D5C)

 

 

 

 

Equipment For Hydaulic Excavator

Caterpillar Frontshovel Arrangement CAT 385C FS + 5090B

ex CAT 5090B, suitable for CAT 385C FS + 5090B, consisting of following components:

  • Boom 4.60 m (15 FT) – Arrangement-No. 184-5557
  • Stick 3.48 m (11.4 FT) – Arrangement-No. 184-5559
  • Bottom-Dump-Bucket 4.60 m³, width 2.63 m, weight approx. 9000 kg
  • Miscellanious (Hydraulic Lines etc.)

 

Hydraulic Cylinders not complete – please request for availability and pictures!

 

Specifications of Hydraulic Cylinders:

Boom:
Bore: 180 mm
Stroke: 1415 mm

Stick:
Bore: 220 mm
Stroke: 1855 mm

Bucket:
Bore: 178 mm
Stroke: 1810 mm

Bottom Dump:
Bore: 160 mm
Stroke: 275 mm

 

____________________________________________________________

 

Frontschaufel Ausrüstung ex CAT 5090B, passend für CAT 385C FS + CAT 5090B

bestehend aus folgenden Komponenten:

Ausleger 4600 mm

(Arrangement-Nr. 184-557)

 

Stiel 3480 mm

(Arrangement-Nr. 184-5559)

 

Klappschaufel 4,60 m³, Breite 2630 mm, Gewicht: ca. 9000 kg

 

Kleinteile (Hydraulikleitungen etc.)

 

Hydraulikzylinder nicht vollständig vorhanden – bitte Verfügbarkeit und Bilder anfragen!

 

Technische Daten Hydraulikzylinder

Ausleger:

Bohrung: 180 mm

Hub: 1415 mm

 

Stiel:

Bohrung: 220 mm

Hub: 1855 mm

 

Schaufel:

Bohrung: 178 mm

Hub: 1810 mm

 

Klappe:

Bohrung: 160 mm

Hub: 275 mm

 

 

Komatsu HD 325-6

SOLD

Quarry Truck

Year 2003, approx. 23400 hours

Komatsu engine SAA6D140E-3 – 364 KW/495 HP / 2000 rpm (EU-Stage II / TIER2)

ROPS-cabin with airconditioning

Tires 18.00 R 33 approx. 40-50% good

Body 24 m³ (SAE 2:1) w/exhaust heating

Engine preheating

CE

good condition

 

 

Transport dimensions (approx.):
Length: 8.70 m
Width:  3.66 m (Tires)
Height: 4.00 m (cabin: 3.70 m)
Operating Weight (empty): approx. 31280 kg

Max. Payload: 36500 kg

 

_______________________________

 

Muldenkipper Komatsu HD 325-6

Bj. 2003, ca. 23.400 Betr.-Std.

Komatsu Motor SAA6D140E-3 – 364 KW/495 PS / 2000 U/min (EU-Stufe II / TIER2)

ROPS-Kabine mit Klimaanlage
Reifen 18.00 R 33 ca. 40-50% gut

Mulde 24 m³ (SAE 2:1) mit Muldenheizung

Motorvorwärmung

CE

guter Zustand

 

 

Transportabmessungen (ca.):
Länge:  8,70 m
Breite:  3,66 m (Reifen)
Höhe:   4,00 m (Kabine: 3,70 m)

Betriebsgewicht (leer): ca. 31.280 kg

Max. Nutzlast: 36.500 kg

 

 

Caterpillar M318 C

SOLD

Mobile Excavator

Year 2006, approx. 14300 hours

CAT diesel engine 3056E ATAAC, 113 KW/154 HP / 2.000 rpm (EU-Stage II / TIER2)

Double tires 10.00-20

Blade

Adjustable boom hydr.

Stick 2.80 m

Full auxiliary hydraulic

Quick coupler mech. Lehnhoff MS10-3

GP Bucket w/teeth 1.2 m width

Air conditioner

Radio

Fuel filling pump electr.

German machine / Original CE

good full working condition

 

________________________

 

Mobilbagger Caterpillar M318C

Baujahr 2006, ca. 14.300 Betr.-Std.

CAT Dieselmotor 3056E ATAAC, 113 KW/154 PS / 2.000 U/min. (EU-Stufe II / TIER2)

Zwillingsbereifung  10.00-20 ca. 50%

Abstützplanierschild

Verstellausleger hydr.

Löffelstiel 2800 mm

Kombihydraulik

Schnellwechsler mech. Lehnhoff MS 10-3

Tieflöffel 1200 mm mit Zähnen

Klimaanlage

Radio

Elektrische Betankungspumpe

Deutsche Maschine mit Original CE

guter einsatzbereiter Zustand

 

 

Transportabmessungen (ca.):

Länge: 8,30 m

Breite: 2,55 m

Höhe: 3,20 m

Gewicht: ca. 18.500 kg

 

 

 

Transport dimensions (approx.):

Length: 8.30 m

Width: 2.55 m

Height: 3.20 m

Weight: approx. 18500 kg

Caterpillar 740

SOLD

Articulated Dump Truck

Year 2005, approx. 12030 hours

CAT Engine C15 ACERT – 327 KW/445 HP / 1700 rpm (EU-Stage IIIA)

ROPS/FOPS-cabin

Air conditioner

Tires 29.5 R 25 Michelin XADN**, front: 80%, rear: 3×40%/1×10% good

Body 22.9 m³ (SAE 2:1) w/exhaust heating

Central lubrication

Radio

CE

Very good condition

 

Last service at 12000 hours (incl. A/C-service)

Rear axle sealed

 

Transport dimensions (approx.):
Length: 10.90 m
Width:  3.45 m
Height: 3.75 m
Operating Weight (empty): approx. 32850 kg

Max. Payload: 38000 kg

 

________________________________

 

Dumper (knickgelenkt) Caterpillar 740

Bj. 2005, ca. 12.030 Betr.-Std.

CAT-Motor C15 ACERT – 327 KW/445 PS / 1700 U/min (EU-Stufe IIIA)

ROPS/FOPS-Kabine

Klimaanlage

Reifen: 29.5 R 25 Michelin XADN**, vorne: 80%/hinten: 3×40%/1×10% gut

Mulde 22,9 m³ (SAE 2:1) mit Muldenheizung

Zentralschmieranlage

Radio

CE

sehr guter Zustand

 

letzter Service bei 12.000 Betr.-Std. (inkl. Klimaanlagen-Service)

Hinterachse abgedichtet

 

Transportabmessungen (ca.):
Länge:  10,90 m
Breite:  3,45 m
Höhe:   3,75 m

Betriebsgewicht (leer): ca. 32.850 kg

Max. Nutzlast: 38.000 kg

Caterpillar 385 C L ME

SOLD

Hydraulic Tracked Excavator

Year 2006, approx. 15140 hours

CAT-engine C 18 ACERT – 390 KW/530 HP / 1800 rpm – EU-Stage IIIA/Tier3

Cabin with rock guard (FOGS) top / front window

Air conditioner

Undercarriage with variable track gauge

(retracted: 2750 mm / extended: 3510 mm) / overall track length: 6360 mm)

Double grouser track shoes 650 mm

Mass excavation boom 7.25 m

Stick 2.92 m (type: JB)

Rock bucket 2100 mm width, approx. 5.6 m³, V-spade cutting edge with teeth

CE / EPA

Condition of undercarriage: approx. 50 %

Technical good condition

Optical some defects (sheet metal bonnets, catwalks, steps etc.)

Regularly serviced by German CAT dealer Zeppelin

 

 

Transport dimensions (approx.):

Length: 13.50 m

Width: 3.40 m (U/C retracted)

Height: 3.76 m (cabin)

Weight: approx. 85800 kg

 

__________________________________________________________

 

Hydraulik-Kettenbagger

Caterpillar 385C LME

Bj. 2006, ca. 15.140 Betr.-Std.

CAT-Motor C 18 ACERT – 390 KW/530 PS / 1800 U/min.  – EU-Stufe IIIA/Tier3

Kabine mit Steinschlag-Schutzgitter (FOGS) Dach und Frontfenster

Klimaanlage

Unterwagen mit verstellbarer Spurweite

(eingefahren: 2.750 mm / ausgefahren: 3.510 mm / Laufwerkslänge: 6.360 mm)

2-Steg-Bodenplatten 650 mm

Massenaushub-Ausleger 7.250 mm

Löffelstiel 2.920 mm (Typ: JB)

Felstieflöffel 2.100 mm, ca. 5,6 m³, Trapezmesser mit Zähnen

CE / EPA

Laufwerkzustand: ca. 50%

technisch guter Zustand

optisch einige Mängel (Motorklappen, Laufstege, Tritte etc.)

regelmässiger Service durch Zeppelin

 

 

Transportabmessungen (ca.):

Länge: 13,50 m

Breite: 3,40 m (Laufwerk eingefahren)

Höhe: 3,76 m  (Kabine)

Gewicht: ca. 85.800 kg

 

 

 

 

Caterpillar 966 K

SOLD

Wheel Loader

Year 2013, approx. 11600 hours

CAT engine C9.3 ACERT – 199 KW/271 HP (1800 rpm) – EU-stage IIIB
Tires 26.5 R 25 Bridgestone VJT – 10-20 % good
CAT-Bucket 4.2 m³ w/ cutting edge, width 3 m
EH joystick steering
Ride control system (RCS)
Air conditioner
Full fenders rear
CE certified
very good condition, regularly serviced

Transport dimensions (approx.):
Length: 9.00 m
Width: 3.00 m
Height: 3.55 m
Weight: approx. 24500 kg

___________________________________

Caterpillar Radlader 966 K

Baujahr 2013, ca. 11.600 Betr.-Std.

CAT Motor C9.3 ACERT – 199 KW/271 PS (1.800 U/min) – EU-Stufe IIIB
Reifen 26.5 R 25 Bridgestone VJT – 10-20 % gut
4,2 m³-CAT-Schaufel mit Unterschraubmesser, 3000 mm
Elektro-hydraulische Joystick-Lenkung
Hydraulische Schwingungsdämpfung (RCS)
Klimaanlage
grosse Kotflügel hinten
CE
sehr guter Zustand, regelmässiger Service

Transportabmessungen (ca.):
Länge: 9,00 m
Breite: 3,00 m
Höhe: 3,55 m
Gewicht: ca. 24.500 kg

 

 

 

Sandvik DP1100i

SOLD

 

Tophammer – Blasthole Drilling Rig

Sandvik DP 1100i

Year 2010

Hours engine: approx. 11220

Hours hammer: approx. 6060

Hole diameter: 89 – 140 mm (3 ½ -5 ½ ”)

Drill Steel: 51, 60 mm (2, 2 3/8”) rods or 76, 87 mm (3, 3 ½”) tubes

 

Hammer currently equipped with shank adapter for GT60 rods

 

Standard Equipment:

Caterpillar engine C9 ACERT – 225 kW (306 HP) /1 800 rpm (TIER3 Interim / EU Stage III)

Rock drill: HL1060T/PE

Feed: LF1520 with hose reel + Pito 15H

Rod changer: RC1614 / 7+1 rods

Boom: ZB1550H

Control system: SAMI:

  1. Pre-adjustment-option for different rock conditions
  2. Adjustable fine tuning and control diagnostic by self-testing system
  3. incl. Collaring device
  4. incl. Anti-jamming device

 

Carrier: FL6, oscillating – 1.8/3.2 km/h

Compressor: Enduro 25 (14 m³/min-10 bar / 494 cfm/min-145PSI)

Dust collector: DC1520H, hydraulic

ROPS/FOPS cabin with A/C and heater

Reversing alarm

Movable suction head MS 250

Suction shutdown for water holes

Flushing control automatics

TIMi feed align instrument for inclined holes and hole depth measuring

Working lights 15 pcs. (9 x front, 6 x rear)

 

 

Optional Equipment:

Power extractor

Primary cyclone PE 80H

Three-bar grouser plates

Guides for grousers

Rod greasing

Central oiler SLU 30-1 for flushing head, drill steel and hammer

Feed support for soft ground

Hydraulic ground support HM 75

Anti-freeze system for air lines

Horizontal drilling support

Water injection system with tank

Flap feeder for dust collector

Fuel heater for cabin, hydraulic oil, engine and water tank

Towing hook

Electric fuel filling pump

Vacuum cleaner for cabin

Special seat ISRI6000

Roller shutter for cabin windows

Cooler bag

Reversing camera

Xenon lights 9 pcs.

Radio with CD and MP3

 

 

Transport dimensions (approx.):

Length: 11.50 m

Width: 2.50 m

Height: 3.60 m

Weight: approx. 22000 kg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hausherr HBM60 – R6

SOLD

Hydraulic Blasthole Drilling Rig for DTH and rotary technology

 

Year: 1991

Hours (engine) : approx. 11550

Hours (compressor): approx. 4360

 

Hydraulic Blasthole Drilling Rig for DTH and rotary technology

General Specification:

The HBM60 is a universal heavy duty hydraulic drilling machine in a compact design with all necessary elements for drilling blastholes in vertical, vertical inclined and horizontal directions.

It can be used with pneumatic DTH hammer or alternative rotary drilling with tricone roller- or stage bits in soft rock formations.

Changing the drilling technology for DTH or Rotary is quite easy and takes only a few minutes.

The machine is designed for blasthole drilling (presplitting and production) in quarries and open pits.

Driven by a strong Diesel-engine this self-propelled machine travels swiftly and safely over even the most difficult terrain. The well proven modular design of the machine, comprising chassis, superstructure, drill unit, pipe magazine, support frame, drive unit, compressor unit, hydraulic unit, cabin, dust collector etc. are highly functional and simply to service.

 

Technical Specifications:

Drilling Unit / Feed:  

Drilling method: DTH or rotary

Effective length: 4 m

Drill diameter:  65 – 95 mm (rotary) / 90 – 127 mm (DTH)

Rod diameter: 51 –76 mm (rotary) / 76 – 89 mm (DTH)

Depth: 36 m (max.)

Drilling angle: vertical 0-20° / horizontal 45-0-135°

Rod magazine: 8 (+1) (diameter 76 mm / 4 m length / API 2 3/8 reg. thread)

 

Drill Motor:

Operating pressure: 130/160/180 bar (>/= 76 mm rods)

Rotation: 0-135 rpm

Torque: 2190 NM / 180 bar

 

Feed Motor:

Operation pressure: 220 bar

Down thrust (bit load): 60 KN

Withdrawal force (hoist): 60 KN

Feed rate: 35 m/min.

Hoist rate: 35 m/min.

Mast longitudinal adjustable: 1000 mm

 

Undercarriage (Type BII):

Track length: 2.495 mm

Track width: 2.500 mm

Track pad width: 400 mm

Spec. ground pressure: 5 N/cm²

Travel speed: 2,7 km/h

Gradeability: 30 %

 

Drive motors: axial piston (operating pressure: 280 bar)

Brakes: hydr. multi-disc-brakes

Leveling jacks: 4 cylinders / 900 mm stroke

 

Engine:

Diesel engine: Deutz BF6L913, 104 KW/141 HP / 2300 rpm

Voltage: 24 V

Fuel tank capacity: 400 l

 

Hydraulics:

2 Axial piston-variable displacement pumps: Flow 118 l/min / operating pressure: max. 280 bar

2 Gear wheel pumps: Hydr. cylinder: Flow 25 l/min / 190 bar

Dust collection: Flow 77 l/min / 130 bar

Hydraulic tank capacity: 250 l

1 Return flow filter and 2 suction filters

 

Compressor:

Type: Mannesmann Demag SE 012 HG

Rotation speed (inlet): 2.300 rpm

Working pressure: 7 bar

Capacity: 8,1 m³

 

Dust collector:

Type: Herding HY-A-30/J

Fan drive: hydr. gear wheel motor

Rotation speed: 3700 rpm

Suction capacity: 30 m³/min.

Content of solid in exhaust air: max. 20 mg/m³

 

Operator cabin:

Mounted vibration-damping

Safety glazing with sound-absorbing interior (sound level <80 dB)

Control panels

Heater and air conditioner

Radio

 

Transport dimensions (approx):

Length: 9.20 m

Width:  2.50 m (dismantled dust collector)

Height: 3.85 m

Weight: 14000 kg

 

 

 

 

 

Caterpillar M313 D

SOLD

Mobile Excavator

Year 2015, approx. 4970 hours

CAT diesel engine C4.4 ACERT, 95 KW/129 HP / 2000 rpm (EU-Stage IIIB / TIER4)

Double tires 10.00-20

Blade

Adjustable boom hydr.

Stick 2.30 m

Full auxiliary hydraulic

Quick coupler hydr. CW20

GP Bucket w/teeth and cutting edge

Air conditioner

Radio

Fuel filling pump electr.

German machine / Original CE

5000 hour-service just carried out by Zeppelin

optically and technically top condition

 

 

Transport dimensions (approx.):

Length: 8.30 m

Width: 2.55 m

Height: 3.15 m

Weight: approx. 14000 kg

_____________________________

 

Mobilbagger Caterpillar M313D

Baujahr 2015, ca. 4.970 Betr.-Std.

CAT Dieselmotor C4.4 ACERT, 95 KW/129 PS / 2.000 U/min. (EU-Stufe IIIB / TIER4)

Zwillingsbereifung  10.00-20

Abstützplanierschild

Verstellausleger hydr.

Löffelstiel 2300 mm

Kombihydraulik

Schnellwechsler hydr. CW20

Tieflöffel mit Zähnen und Vorsteckschneide

Klimaanlage

Radio

Elektrische Betankungspumpe

Deutsche Maschine mit Original CE

5000 Stunden-Service soeben von Zeppelin durchgeführt

Top Zustand, optisch und technisch

 

 

Transportabmessungen (ca.):

Länge: 8,30 m

Breite: 2,55 m

Höhe: 3,15 m

Gewicht: ca. 14.000 kg

 

Caterpillar 775 E

SOLD

Off-Highway Truck

Year 2003, approx. 7060 hours after Rebuild in 09/2016

Total hours frame: approx. 20500

CAT engine 3412E HEUI – 544 KW/740 HP

Tires 24.00 R 35 – front Bridgestone VMTP approx. 80 % good / rear (retread): approx. 50 %

Flat Floor Body 41.5 m³ w/body heating

Automatic Retarder (ARC) and Traction Control (TCS)

Air conditioner

Rear view camera

 

Very good condition

Regularly serviced by Zeppelin

Certified Rebuild “Power Train and Hydraulic” 09/2016

 

 

Transport dimensions (approx.):

Length: 9.30 m

Width: 4.46 m

Height: 4.41 m

Weight (empty): approx. 45200 kg

Payload: max. 63200 kg

 

_____________________________________________________

 

Muldenkipper

Caterpillar 775 E

Bj. 2003, ca. 7.060 Betr.-Std. nach „Rebuild“ in 09/2016 / gesamt Rahmen: ca. 23.500 Betr.-Std.

CAT-Motor 3412E HEUI- 544 KW/740 PS
Reifen: 24.00 R 35 – vorne Bridgestone VMTP ca. 80 % gut / hinten (runderneuert): ca. 50 %

Flachmulde 41,5 m³ mit Muldenheizung

Dauerbremsautomatik (ARC) und Antriebsschlupfregelung (TCS)

Klimaanlage

Rückfahrkamera

 

Sehr guter Zustand

Regelmässiger Service durch Zeppelin

Zertifizierter Rebuild „Antriebsstrang und Hydraulik“ in 09/2016

 

 

 

Caterpillar 906 H

SOLD

Wheel Loader

Year 2011, approx. 5420 hours

CAT engine C3.4 – 53 KW/72 HP (Tier3/EU-Stage IIIA)

Tires 405/70 R 18 – approx. 50 %

ROPS/FOPS-cabin

Multi-purpose bucket w/bolt-on-edge 0.9 m³

Quick coupler hydr.

Pallet Forks

CE

Good generally condition

Last service recently made

 

Transport dimensions (approx.):
Length: 5.60 m
Width:  1.84 m
Height: 2.47 m
Weight: approx. 5600 kg

 

____________________________________________

 

Radlader

CAT 906 H

Bj. 2011, ca. 5.420 Betr.-Std.

CAT Motor C3.4 – 53 KW/72 PS (Tier3/EU-Stufe IIIA)

Reifen 405/70 R 18 – ca. 50 %

ROPS/FOPS-Kabine

0,9 m³-Kombischaufel mit Unterschraubmesser

Schnellwechseleinrichtung hydr.

Staplereinrichtung

CE

guter Allgemeinzustand

letzter Service wurde kürzlich durchgeführt

 

 

Transportabmessungen (ca.):
Länge:  5,60 m
Breite:  1,84 m
Höhe:   2,47 m
Gewicht: ca. 5.600 kg

 

 

 

Caterpillar 966 M XE

SOLD

Wheel Loader

 

Year 2015, approx. 5500 hours

CAT engine C9.3 ACERT – 222 KW/298 HP (EU-Stage IV/Tier4)

Tires 26.5 R 25 Michelin XHA II – > 90% good

Bucket 4.2 m³ w/teeth

EH joystick steering

Ride control system (RCS)

Air conditioner

Radio

Central lubrication

Full fenders rear

Back-up camera

CE / EPA

Very good condition

Regularly serviced by German CAT dealer Zeppelin

 

 

Transport dimensions (approx.):

Length: 9.00 m

Width:  3.27 m (bucket)

Height: 3.60 m (ROPS)

Weight: approx. 23500 kg

 

 

Caterpillar 321 C LCR

SOLD

Tracked Excavator 

Short tail swing radius

 

Year 2007, approx. 14500 hours

CAT engine 3066 ATAAC –  103 KW / 140 HP – EU Stage II

Cabin w/air conditioner

Track shoes 600 mm 

Monoboom 5.68 m

Stick 2.90 m

Hammer-/crusher-lines

Quick coupler mech. (Lehnhoff)

Hydr. tiltable ditch cleaning bucket  

CE certified

good general condition

 

 

Transport dimensions (approx.):

Length: 8.90 m

Width: 2.98 m

Height: 3.20m  

Weight: approx. 23000 kg

 

______________________________________________

 

Kettenbagger (Kurzheck)

Caterpillar 321 C LCR

Bj. 2007, ca. 14.500 Betr.-Std.

CAT-Motor 3066 ATAAC – 103 KW/140 PS – EU-Stufe II

Kabine mit Klimaanlage

Bodenplatten 600 mm

Monoausleger 5.680 mm

Stiel 2.900 mm

Hammer-/ Scherenhydraulik

Schnellwechsler mech. (Lehnhoff)

Hydraulisch verstellbarer Schwenklöffel

CE

guter Allgemeinzustand

 

 

Caterpillar 930 H

SOLD

Wheel Loader

Year  2012, approx. 4145 hours

CAT engine C6.6 ACERT – 113 KW/154 HP (2300 rpm) – EU-stage IIIA

ROPS/FOPS-cabin

Air conditioner

Tires 20.5 R 25 Michelin XHA – approx. 30 % good

CAT (Verachtert) quick coupler hydraulic

Bucket 2.7 m³ with teeth (Reschke) / QC

Pallet forks with new fork tines 1500 mm / QC

Auxiliary hydraulics / third valve

Ride control system (RCS)

Additional counterweight

Weighing scale Pfreundt WK 50 S with printer (manuf. year 2017, calibrated until 2021)

Full fenders rear

Roading arrangement

CE

very good general condition, regularly serviced by German CAT dealer (last service at 4124 hours)

 

 

Transport dimensions (approx.):
Length: 8.00 m
Width:  2.55 m
Height: 3.28 m
Weight: approx. 13500 kg

 

 

Caterpillar 950 H

SOLD

Wheel Loader

Year 2009, approx. 17570 hours

 

CAT engine C7 ACERT – 147 KW/200 HP (1400 rpm) – EU-stage IIIA

Tires 23.5 R 25 retreaded –  30-40 % good

CAT bucket 3 m³ w/teeth, width 2.85 m

Conventional steering

Ride control system (RCS)

Air Conditioner

Rear view camera

Full fenders rear

Roading equipment

Central lubrication

CE certified

 

good general condition, regularly serviced by German CAT dealer Zeppelin

 

Transport dimensions (approx.):
Length: 8.50 m
Width:  2.85 m
Height: 3.46 m
Weight: approx. 18700 kg

 

 

 

 

 

 

Caterpillar 966 K

SOLD

Wheel Loader

 

Year  2011, approx. 11600 hours

 

CAT engine C9.3 ACERT – 199 KW/271 HP (1800 rpm) – EU-stage IIIB

Tires 26.5 R 25 Triangle TB516 – approx. 80% good

Bucket 4.2 m³ w/ cutting edge, width 3 m (Reschke),

EH joystick steering

Ride control system (RCS)

Air conditioner

Weighing scale Pfreundt WK 50 S

Full fenders rear

CE certified

Very good condition, regularly serviced by German CAT dealer Zeppelin

New transmission!
Injectores, particle filter and HEUI pump also already replaced

 

Transport dimensions (approx.):

Length: 9.00 m

Width:  3.00 m

Height: 3.55 m

Weight: approx. 24500 kg

 

Caterpillar 962 H

SOLD

Wheel Loader

Year  2010, approx. 14500 hours

CAT engine C7 ACERT – 158 KW/215 HP (1400 rpm) – EU-stage IIIA
Tires 23.5 R 25 retreaded – 30-40 % good
Bucket 3.8 m³ w/ cutting edge, width 2.99 m (Reschke)
Command control steering
Ride control system (RCS)
Air conditioner
Full fenders rear
Rear view camera
CE certified

very good general condition, regularly serviced

 

Transport dimensions (approx.):
Length: 8.50 m
Width:  3.00 m
Height: 3.46 m
Weight: approx. 19700 kg

Caterpillar 775 F

SOLD

Off-Highway-Truck

 

Year 2008, approx. 14290 hours

CAT engine C27 ACERT – 552 KW/751 HP

Tires 24.00 R 35 Bridgestone

(front: 20-25% / rear: 75-80% good)

Flat floor body 41.9 m³ w/body heating

Automatic Retarder (ARC) and Traction Control (TCS)

Air conditioner

Rear view camera

Engine coolant heater

CE / EPA

Good condition

Regularly serviced by German CAT dealer Zeppelin

 

 

Transport dimensions (approx.):

Length: 10.40 m

Width: 4.42 m

Height: 4.43 m

 

Weight (empty): approx. 46000 kg

Payload: max. 64000 kg

 

 

Caterpillar 966 K

SOLD

Wheel Loader

Year  2011, approx. 14100 hours

CAT engine C9.3 ACERT – 199 KW/271 HP (1800 rpm) – EU-stage IIIB
Tires 26.5 R 25 Bridgestone VJT – front 20-30%, rear 10-15% good
Bucket 4.2 m³ w/ cutting edge, width 3 m (Reschke)
EH joystick steering
Ride control system (RCS)
Air conditioner
Full fenders rear
CE certified

good condition, regularly serviced

 

Transport dimensions (approx.):
Length: 9.00 m
Width:  3.00 m
Height: 3.55 m
Weight: approx. 24500 kg

 

Caterpillar 777 D

SOLD

Off-Highway-Truck

 

CAT engine 3508B EUI – 699 KW/951 HP

Tires 27.00 R 49 Bridgestone

(front: 40-50 % / rear: 20-40 % good)

Dual-Slope/V-shaped body 60.1 m³ / Hardox-Liners

Body heating

Tailgate

Air conditioner

Front-/Rear view camera

Engine heater

CAT weighting system

Radio

well maintained / full working condition

 

 

Dimensions (body w/liners / w/o tailgate) approx.:

Length: 9.80 m

Width (Front tires): 4.96 m

Width (Body w/o tailgate): 6.10 m

Height (Top of cabin): 4.57 m

Height (Top of ROPS): 5.15 m

 

Weight (empty): approx. 72.600 kg

Payload: max. 90.700 kg

Gross weight: 163.300 kg

 

 

Caterpillar 385C FS

SOLD

Front Shovel – Hydraulic Excavator

 

year 2008, approx. 15.800 hours

CAT-Engine C 18 ACERT – 390 KW/530 HP / 1800 rpm  – EU-Stage IIIA/Tier3

Cabin with rock guard (FOGS) top / front window

Air conditioner

Cab elevation 870 mm

HD-undercarriage with variable track gauge

(retracted: 2750 mm / extended: 3510 mm) / overal track length: 5840 mm)

Double grouser track shoes 650 mm

Boom 4.60 m

Stick 3.48 m (type: JB)

Central lubrication (boom/stick)

HD-Rock shovel 5.7 m³, 2700 mm, weight: 11050 kg

CE

Condition of undercarriage: approx. 70 % good

Good condition

Regularly serviced by German CAT dealer Zeppelin

 

 

Transport dimensions (approx.):

Length: 14.25 m

Width: 3.47 m

Height: 4.66 m (-> 3.50 m dismantled cab)

Weight: approx. 90600 kg

 

HAMM H 13i

SOLD

Vibratory Smooth Drum Roller

 

Year 2016, approx. 1190 hours

Deutz engine TCD 4.1 L4 – 115 KW/156 HP / EU-stage V/Tier4

Smooth drum, 2140 mm width, approx. 80% good

Automatic vibration system

3-point articulation

Tires AW 23.1-26 12 PR, approx. 80% good

ROPS/FOPS closed cabin

Air conditioner and heater

Back-up alarm

CE / EPA

very good condition

 

 

Transport Dimensions (approx.):

Length: 5.85 m

Width:  2.30 m

Height: 2.96 m

Weight: 13000 kg

 

Caterpillar 775 B

SOLD

Off-Highway Truck

 

year 1994, approx. 21930 hours

CAT engine 3412 – 485 KW/650 HP

Tires 24.00 R 35  – front (Michelin): 0-10 % / rear (Michelin X-Quarry – retread): 70-80 % good

Body 39.3 m³ w/body heating

Air conditioner

Rear view camera

Engine heater

well maintained / full working condition

 

Transport dimensions (approx.):

Length: 9.30 m

Width: 4.45 m

Height: 4.41 m

Weight (empty): approx. 41700 kg

Payload: max. 60000 kg

 

Caterpillar 773 B

SOLD

Off-Highway Truck

 

year 1992, approx. 34050 hours

CAT engine 3412 – 485 KW/650 HP

Tires 24.00 R 35 front (Michelin): 20-30 % good / rear (retread): 10-15 % good

Body 34.1 m³ w/body heating

Rear view camera

Engine heater

well maintained / full working condition

new engine at 18000 hours

 

 

Transport dimensions (approx.):

Length: 9.12 m

Width: 4.45 m

Height: 4.43 m

Weight (empty): approx. 40800 kg

Payload: max. 52600 kg

 

Caterpillar 966 G

SOLD

Wheel Loader

 

Year 2004, approx. 12500 hours

CAT engine 3176 ATAAC – 193 KW/263 HP

Tires 26.5 R 25, front Bridgestone VJT L3, rear Good Year RL5K – 20-30% good

Bucket 4.5 m³ w/bolt-on-edge

Command steering

Ride control system (RCS)

Air conditioner

Central lubrication

Full fenders rear

CE / EPA

good condition

 

 

Transport dimensions (approx.):

Length: 9.00 m

Width:  3.22 m

Height: 3.60 m

 

Weight: approx. 23500 kg

 

 

Terex Finlay 663 T Supertrak

SOLD

Tracked Screener / Inclined Screens

 

Year 2008, approx.  5100 hours

Deutz engine air cooled – 53 KW/71 HP / 2300 rpm

The Terex® Finlay 663 combines the functions of scalping, screening and stockpiling into the one integrated mobile unit. Its rugged design enables the Terex Finlay 663 with its top deck 3.05 x 1.25 m (10’ x 4’) and bottom deck 2.35 x 1.25 m (8’ x 4’) for screening materials such as sand and gravel, topsoil or aggregates. Standard features include a variable speed beltfeeder, remote tipping reject grid, hydraulic screen angle adjustment, hydraulic screen tensioning of bottom deck mesh and three on-board stockpiling conveyors.

  • The double deck screen box has all round catwalk access allowing for ease of operational maintenance.
  • Tracked mobility and hydraulic folding product conveyors allow for ease of movement and rapid set up.
  • Maximum utilization of the two decks provide ultra-efficient screening capacities even at small aggregate sizes.
  • Screen box angle can be hydraulically adjusted to an angle between 18° and 39°.

 

Standard Features:

Hopper and Belt Feeder:

800 mm (32’’) wide variable speed belt feeder

5.8 m³ (7.6 yd³) hopper

 

Reject Grid:

100 mm remote control hydraulic tipping reject grid 3.2 m (10’6″)

 

Main Conveyor:

800 mm (32’) wide main belt

Skirting on main conveyor

 

Screenbox:

3.05 m x 1.25 m (10’ x 4’) top deck screen and

2.35 m x 1.25 m (8’ x 4’) bottom deck screen

No mesh or speedharps included for any deck

(but all mesh fitting parts included as standard)

Access catwalks to both sides and around top of screen

Screen box reject chutes (1 nr)

 

Side Conveyors:

650 mm (26″) wide chevron belt on both side conveyors

 

Fines Conveyors:

1000 mm (40″) wide fines belt

 

Undercarriage:

Heavy duty undercarriage unit with 400 mm (16″) wide tracks

Control operation of tracks via hand-held set with 5 m connection lead with

heavy duty square connector

 

General:

Guards to M & Q specification

Low level greasing

Emergency stops (4 nr )

 

 

Dimensions Working Position (approx.):

Length: 13.85 m

Width: 14.65 m

Height: 5.00 m

Weight: approx. 18000 kg

 

 

Transport dimensions (approx.):

Length: 12.50 m

Width: 2.75 m

Height: 3.36 m

Weight: approx. 18000 kg

 

 

 

Caterpillar 302.7D CR

SOLD

Mini Hydraulic Excavator

 

Year 2014, approx. 1200 hours

Yanmar Engine 3TNV76 – 15 KW/21 HP

Cabin with split front window / Heater

Rubber tracks 300 mm

Dozer blade with float function

Monoboom adjustable

Standard stick

Additional counterweight

Auxiliary hydraulic lines for hammer-/gripper

Quick coupler mech. (Lehnhoff MS03)

Bucket 500 mm

Ditch cleaning bucket hydr. adjustable

CE

very good condition

 

 

Transport dimensions (approx.):

Length: 4.30 m

Width: 1.57 m

Height: 2.41 m

Weight: 2700 kg

 

 

 

Caterpillar CS 563

SOLD

Roller – Vibratory Smooth Drum

 

Year 1992, approx. 5690 hours

CAT engine 3116 – 108 KW/146 HP

Vibratory smooth drum 2130 mm width

ROPS/FOPS closed cabin

Tires 16.00 R 25  > 80% good

CE / EPA

 

 

Transport Dimensions (approx.):

Length: 5.20 m

Width:  2.45 m

Height: 3.00 m

Weight: 11500 kg

 

 

 

 

Caterpillar 336 E LN-H

SOLD

Hydraulic Tracked Excavator

 

Year 2014, approx. 5500 hours

CAT-engine C 9.3 ACERT – 236 KW / 321 HP – EU-Stage IIIB/Tier4

Hydraulic hybrid swing system (ESP-Pump / ACS-Valve)

ROPS-cabin with top protection guard

Tripple-grouser track shoes 600 mm

HD-reach boom 6.50 m

Stick 3.20 m (type: DB)

Auxiliary hydraulics for hammer/shear/clamshell-bucket

CAT quick coupler hydr. CW45SH (new)

Bucket 1.60 m w/cutting edge

Rear view camera

Radio

CE

undercarriage: approx. 70% good

very good condition

regularly serviced by German CAT-Dealer Zeppelin

 

 

Transport dimensions (approx.):

Length: 11.20 m

Width: 3.00 m

Height: 3.51 m

Weight: 36000 kg

 

 

Caterpillar 924 F

SOLD

Wheel Loader

 

Year 1995, approx. 6030 hours

CAT engine 3114T – 78 KW/105 HP

EROPS cab with heater

Tires 17.5 R 25 – approx. 30 % good

CAT-bucket 1.5 m³ w/cutting edge

CE

 

Transport dimensions (approx.):

Length:  6.70 m

Width:   2.45 m

Height:  3.15 m

Weight:  9600 kg

 

 

 

Caterpillar 966 H

SOLD

Wheel Loader

 

Year 2007, approx. 13320 hours

CAT engine C11 ACERT – 195 KW / 165 HP (EU-Stage IIIA/TIER3)

ROPS/FOPS cabin

Air conditioner

Tires 26.5 R 25 Michelin XHA II (front approx. 20% / rear approx. 40% good)

Bucket 4.5 m³ w/bolt-on-edge

Command steering

Ride control system (RCS)

Central lubrication

CE

damaged counterweight

otherwise good condition

 

 

Transport dimensions (approx.):

Length:  9.00 m

Width:   3.22 m

Height:  3.60 m

Weight:  24000 kg

 

 

Caterpillar 966 E

SOLD

Wheel Loader

 

Year 1989, approx. 21950 hours

CAT engine 3306 DIT – 180 KW/245 HP

ROPS/FOPS cabin

Tires 26.5 R 25 (approx. 20% good)

Front:  Bridgestone V-Steel VSDT2 (L5) / Rear: Michelin XHA retread

Bucket 4.1 m³ w/bolt-on-edge > 50% good

Rear view camera

Technical good / full working condition

Deficiencies age-appropriate

 

 

Transport dimensions (approx.):

Length: 9.00 m

Width:  3.20 m

Height: 3.50 m

Weight: approx. 22000 kg

 

Caterpillar 775 D

SOLD

Off-Highway Truck

 

year 1997, approx. 35070 hours

CAT engine 3412E – 517 KW/703 HP

Tires 24.00 R 35 – front Michelin / rear retread – 70-80 % good

Body 41.5 m³ w/body heating

Air conditioner

Rear view camera

Engine, transmission and converter have already been replaced

well maintained / full working condition

 

 

Transport dimensions (approx.):

Length: 9.30 m

Width: 4.46 m

Height: 4.41 m

Weight (empty): approx. 41700 kg

Payload: max. 62100 kg

 

Caterpillar 769 C

SOLD

Off-Highway Truck

 

year 1994, approx. 20500 hours

CAT engine 3408 –  336 KW/456 HP

Tires 18.00 R 33 – front (Michelin): 50-60 % good / rear (retread): 80-90 % good

Body 23.5m³ w/body heating

Air conditioner

Engine heater

well maintained / full working condition

 

 

Transport dimensions (approx.):

Length: 8.00 m

Width:  3.64 m

Height: 3.94 m

Weight (empty): approx. 31500 kg

Payload: max. 36300 kg

 

Liebherr PR 734 LGP Litronic

SOLD

Dozer

 

Year 2009, approx. 7600 hours

Liebherr Engine D936-L A6 – 150 KW/204 HP / 1.800 rpm – EU Stage IIIA/Tier3

ROPS/FOPS-cabin

Air conditioner

Track-shoes 812 mm / 32 inch

SU-blade (width 3800 mm / 12.5 ft)

Counterweight

Towing Hook

CE / EPA certified

Condition of undercarriage:

approx. 50-60% good

good condition

 

 

Transport dimensions (w/o blade) (approx.):

Length:  6.00 m

Width:   3.00 m

Height:  3.30 m

Weight: 23000 kg

 

 

 

Caterpillar 980 H

SOLD

Wheel Loader

 

Year 2009, approx. 14300 hours

CAT engine C15 ACERT 237 KW/322 HP (EU-Stage IIIA / TIER3)

Tires 29.5R25 remolded (Michelin XHA): > 50%

Bucket 5.6 m³ w/ bolt-on-edge / 3.60 m width

ROPS/FOPS-cabine w/air conditioner

Command control steering

Ride control system (RCS)

Full rear fenders

Rear view camera

Engine preheater

Central lubrication

CE

very good condition!

 

Transport dimensions (approx.):

Length:  9.50 m

Width:   3.25 m

Height:  3.77 m

Weight: 31500 kg

 

 

 

 

 

Caterpillar 950 M

SOLD

Wheel Loader

 

Year 2015, approx. 4710 hours

CAT engine C7.1ACERT – 186 KW/253 HP (EU-Stage V/Tier4)

Tires 26.5 R 25 Bridgestone VJT – approx. 40% good

Bucket 3.4 m³ w/teeth

EH joystick steering

Ride control system (RCS)

Air conditioner

Full fenders rear

Back-up camera

CE / EPA

Very good condition

Regularly serviced by German CAT dealer Zeppelin

 

 

Transport dimensions (approx.):
Length: 8.56 m
Width:  3.00 m
Height: 3.46 m
Weight: approx. 20000 kg

 

 

 

Caterpillar 966 H

SOLD

Wheel Loader

 

Year 2007, approx. 12280 hours

CAT engine C11 ACERT – 195 KW / 165 HP (EU-Stage IIIA/TIER3)

ROPS/FOPS cabin

Tires 26.5 R 25, approx. 20-30% good (front Bridgestone V-Steel L5, rear Michelin XHA II)

Bucket 4.2 m³ w/bolt-on-edge, width 3 m

Full steering

Ride control system (RCS)

Air conditioner

CE

 

 

Transport dimensions (approx.):

Length:  9.20 m

Width:   3.00 m

Height:  3.60 m

Weight:  24000 kg

 

 

 

 

Caterpillar D 6 H XL II

SOLD

Dozer

Year 1991, approx.  10295 hours

CAT Engine 3306 – 123 KW/167 HP

ROPS/FOPS-cabin

Differential steering

Track-shoes 610 mm / 24 inch

S-blade (capacity 3.89 m³ / 5.09 yd³ – width 3200 mm / 10.5 ft)

Ripper Valve

Towing Hook

Condition of undercarriage (Berco):  approx. 60 % good

good generally condition

last service made at 10261 hours (02/22)

 

Transport dimensions (approx.):
Length: 5.00 m
Width:  3.20 m / 2.64 m (w/o blade)
Height: 3.13 m
Weight: approx. 18000 kg

 

_____________________________________________

 

Kettendozer

CAT D6H XL II

Bj. 1991, ca. 10.295 Betr.-Std.

CAT Motor 3306  – 123 KW/167 PS

ROPS/FOPS- Kabine

Differentiallenkung

Bodenplatten 610 mm

S-Schild  (3,89 m³ / 3.200 mm Breite)

Ripper-Ventil

Anhängevorrichtung

Laufwerkszustand (Berco): ca. 60 % gut

guter Allgemeinzustand

letzter Service bei 10.261 Betr.-Std. (02/22) durchgeführt

 

 

Transportabmessungen (ca.):
Länge:  5,00 m
Breite:  3,20 m / 2,64 m (o. Schild)
Höhe:   3,13 m
Gewicht: ca. 18.000 kg

 

 

 

Bell B 50 D 6x6

SOLD

Articulated Dump Truck

Year 2013, approx. 11550 hours

Mercedes engine OM502LA V8 – 375 KW/510 HP – AdBlue (EU Stage IIIB/Tier4)

ROPS/FOPS-cabin

Air conditioner

Tires 875/65 R 29 retreated, approx. 70-80% good

Body 29.5 m³/39 yd³ (SAE 2:1) w/exhaust heating and automatic tailgate

Automatic Retarder

Central lubrication

Rear View Camera

Radio

CE

Very good condition

 

 

Transport dimensions (approx.):
Length: 10.80 m
Width:  3.90 m
Height: 3.90 m

Operating Weight (empty): approx. 35660 kg

Max. Payload: 45400 kg

 

_________________________________________

 

Dumper (knickgelenkt)

BELL B50D 6×6

Bj. 2013, ca. 11.550 Betr.-Std.

Mercedes-Motor OM502LA V8 – 375 KW/510 PS – AdBlue (EU Stufe IIIB/Tier4)

ROPS/FOPS-Kabine

Klimaanlage

Reifen: 875/65 R 29 runderneuert, ca. 70-80% gut

Mulde 29,5 m³ (SAE 2:1) mit Muldenheizung und automatischer Heckklappe

Automatik-Retarder

Zentralschmieranlage

Rückfahrkamera

Radio

CE

Sehr guter Zustand

 

 

Transportabmessungen (ca.):
Länge:  10,80 m
Breite:  3,90 m
Höhe:   3,90 m

Betriebsgewicht (leer): ca. 35.660 kg

Max. Nutzlast: 45.400 kg

 

Our Trusted Brands

Since 30 years I have been working in the machinery business,
nearly two-thirds along the way for the German Caterpillar dealer.
I keep specialized in the sale of all types of used equipment from leading
manufacturers such as Caterpillar, Volvo, Komatsu, Liebherr, Hitachi, just to name a few.

Our Trusted Brands

Since 30 years I have been working in the machinery business, nearly two-thirds along the way for the German Caterpillar dealer. I keep specialized in the sale of all types of used equipment from leading manufacturers such as Caterpillar, Volvo, Komatsu, Liebherr, Hitachi, just to name a few.

The main focus is on the sale of Surface Drill Rigs mainly from Sandvik / Tamrock and Atlas Copco as well meaning the entire range of Top Hammer and DTH machines. In this special field my support has been developed over the last 10 years and I can provide professional expertise, reliability and experience.

The main focus is on the sale of Surface Drill Rigs mainly from Sandvik / Tamrock and Atlas Copco as well meaning the entire range of Top Hammer and DTH machines. In this special field my support has been developed over the last 10 years and I can provide professional expertise, reliability and experience.

Our Support

My primary goal is to retain our previous clients through honesty, diligence, good quality and fair pricing. I believe that everyone involved benefits greatly from long term relationships based on these values. I try to understand my clients’ requirement in order to offer, source or supply the best suited equipment for the project at hand. I know that you have to remain flexible and transparent in an ever-changing business environment in order to best react to client needs.

My primary goal is to retain our previous clients through honesty, diligence, good quality and fair pricing. I believe that everyone involved benefits greatly from long term relationships based on these values. I try to understand my clients’ requirement in order to offer, source or supply the best suited equipment for the project at hand. I know that you have to remain flexible and transparent in an ever-changing business environment in order to best react to client needs.

“My new Recon Drills is said to be the logical continuation of the successful history of the prior family-owned company Recon GmbH that has gained a good reputation in dealing used machinery for the construction, drilling and mining industries for a long period of time.”

Marco Michalik

“My new Recon Drills is said to be the logical continuation of the successful history of the prior family-owned company Recon GmbH that has gained a good reputation in dealing used machinery for the construction, drilling and mining industries for a long period of time.”

Marco Michalik

Get In Touch

+49 171 2322212‬

Address

Marco Michalik
Karl-Pieper-Strasse 33
59581 Warstein
Germany

UST.-ID: DE 327907529

Email

info@recondrills.com

Send A Message

Privacy Policy

8 + 9 =

Get In Touch

+49 171 2322212‬

Address

Marco Michalik
Karl-Pieper-Strasse 33
59581 Warstein
Germany

UST.-ID: DE 327907529

 

Email

info@recondrills.com

Send A Message

Privacy Policy

10 + 4 =